Probe Interface Summary
ProCounter III CMM Interface
Helmel designed CMM Interface for use with manual CMMs with Renishaw scales.
PI4-2 Probe Interface
The PI4-2 interface is the basic interface for standard touch-trigger probes that allows for a PICS or SSR output. The supply voltage is automatically detected. The unit is usually free-standing but can be rack-mounted.
PI200-3 Probe Interface
The PI200-3 interface can be interconnected within the majority of Renishaw’s manual and motorized probing installations with no additional CMM communications or control signalling required. Optimum performance will be obtained on installations utilizing probe damping or halt signal facilities. Probe signalling between TP200 and PI200-3 must be direct and uninterrupted. Probe signal interfacing may be present within some CMM cabling arrangements. Call Renishaw for further details.
PH10-3 PLUS Probe Interface
PHC10-3 PLUS head controller supports PH10 PLUS (PH10T PLUS, PH10M PLUS or PH10MQ PLUS) PHC10-3 PLUS head controller receives instructions from the CMM control. The PHC10-3 PLUS controls all head functions and reports system status to the CMM: Drives PH10 PLUS (PH10T PLUS, PH10M PLUS or PH10MQ PLUS) to position - sent either from the HCU1 or CMM. Checks and reports position Flags up errors, e.g. failure to reach position, obstruction before or after locking etc.