PHC10 PLUS Probe Interface
PHC10-3 PLUS head controller supports PH10 PLUS (PH10T PLUS, PH10M PLUS or PH10MQ PLUS) PHC10-3 PLUS head controller receives instructions from the CMM control.
The PHC10-3 PLUS controls all head functions and reports system status to the CMM:
- Drives PH10 PLUS (PH10T PLUS, PH10M PLUS or PH10MQ PLUS) to position - sent either from the HCU1 or CMM.
- Checks and reports position
- Flags up errors, e.g. failure to reach position, obstruction before or after locking etc
| Application | PH10 PLUS (PH10T PLUS, PH10M PLUS or PH10MQ PLUS) |
| PSU electrical ratings | Supply voltage: 100 V to 240 V ± 10% Frequency range: 50 Hz to 60 Hz Power consumption: 49 W max. Transient voltages: Installation category II |
| Current Consumption | Less than 1A |
| Power supply | 24 Vdc 49 W provided by the Emerson PSU (DP4024N3M) power adaptor |
| Dimensions | Height: 44 mm (1.76+ in) Width: 440 mm (17.3 in) Depth: 180 mm (7.09 in) |
| Weight | 1.5 kg (3.31 lbs) |
| Data Transmission | RS232 or USB |
| Output | 9 way 'D' type socket |
| Maximum cable length RS232 USB |
50 m 5 m (extendible in lengths of 5 m by use of a hub, to a maximum length of 30 m) |
| Hand held control unit | HCU1 only |