| Locating Components |
Part Number |
Name |
Price |
QTY |
|
 |
MCS1-25 |
25mm length x 25.4mm dia. standoff |
$14.20 |
|
 |
| MCS1-38 |
38mm length x 25.4mm dia. standoff |
$14.45 |
|
|
| MCS1-50 |
50mm length x25.4mm dia. standoff |
$14.70
|
|
|
| MCS1-75 |
75mm length x 25.4mm dia. standoff |
$15.25 |
|
|
| MCS1-100 |
100mm length x 25.4mm dia. standoff |
$15.75 |
|
|
| MCS1-150 |
150mm length x 25.4mm dia. standoff |
$16.80 |
|
|
| MCS1-200 |
200mm length x 25.4mm dia. standoff - Check Product List |
$17.85 |
|
|
| MCS1 Set |
Complete set (20) |
$297.40 |
|
|
| |
 |
MCS19-25 |
25mm x 19mm dia. standoff |
$10.50 |
|
|
| MCS19-38 |
38mm x 19mm dia. standoff |
$11.00 |
|
|
| MCS19-50 |
50mm x 19mm dia. standoff |
$11.50 |
|
|
| MCS19-75 |
75mm x19mm dia. standoff |
$12.00 |
|
|
| MCS19-100 |
100mm x 19mm dia. standoff |
$12.50 |
|
|
| MCS19 Set |
Complete set (20) - Check Product list |
$230.00 |
|
|
| |
 |
MCMAG75-5 |
Magnetic attachment for standoffs, 19mm dia x 12.5mm
Outer case is nickel plated, top surface is ground.
Post is M6 stainless |
$13.00 |
|
|
| |
 |
MCMAGP25 |
Magnetic pin standoff assembly
rare earth magnet: 6.35mm thick x 19mm dia.
Post is M6 stainless x 8.3mm dia., w/locknut |
$30.00 |
|
|
| |
 |
MCMJS01 |
Mini jack-screw
(used with lock-nut, turns standoffs into jackstands) |
$10.40 |
|
|
| |
 |
MCCLL |
Large conical locator, 25.4mm dia.
(3mm tip x 35° taper), shown on standoff |
$15.45 |
|
|
| |
 |
MCCLL19 |
Conical locator, 19mm dia. x 19mm length |
$14.15 |
|
|
| |
 |
MCSWS |
Swivel head assembly
(For horizontal or angular clamping setups)
With M6 stainless screw-post |
$27.30 |
|
|
| |
 |
MCCSA300 |
300mm cross-slide assembly, engraved, with (2) sliding
clamps, (2) stainless thumbscrews, and (2) lock-nuts
Shown with sliding tool blocks and clamp assemblies |
$69.50 |
|
|
| |
 |
MCAR0251 |
Adjustable rest button, stainless, spherical top |
$5.50 |
|
|
| |
 |
MCZP-5 |
Adjustable Z locator pin
8.3mm dia. with 8.3 spherical tip, M6 x 25.4mm thread |
11.50 |
|
|
| |
CFR516 |
5/16ths stainless flat tip pin, ¼-20 thread - Check Product List |
$12.00 |
|
|
| |
 |
MCLR50 |
50mm vertical riser, engraved w/ 6 t-slots |
$35.20 |
|
|
| MCLR200 |
200mm vertical riser,engraved w/ 6 t-slots |
$40.50 |
|
|
| MCLR300 |
300mm vertical riser,engraved w/ 6 t-slots |
$46.50 |
|
|
| MCLR450 |
450mm vertical riser,engraved w/ 6 t-slots |
$54.00 |
|
|
| MCLR600 |
600mm vertical riser,engraved w/ 6 t-slots |
$66.00 |
|
|
| MCLR800 |
800mm vertical riser,engraved w/ 6 t-slots |
$72.00 |
|
|
| MCLR1000 |
1000mm vertical riser,engraved w/ 6 t-slots |
$80.00 |
|
|
| MCLR1500 |
1500mm vertical riser,engraved w/ 6 t-slots |
$102.00 |
|
|
| Note: |
Shown with optional full length t-nut strip
risers require 2-way connectors if purchased seperately |
|
| |
 |
MCAC-901 |
90 degree angle connector for risers w/ M6 tooling holes
(2) connectors are recommended for risers up to 150mm
(3) connectors are recommended for all taller risers
When used as a tooling detail, provides threaded holes
parallel to t-slot axis. |
$18.35 |
|
|
| |
 |
MCTNVB-1 |
Sliding Vee t-nut |
$23.00 |
|
|
| |
 |
MSTB-1 |
Sliding t-nut tooling block with M6 threaded holes
Provides threaded holes perpendicular to t-slot. |
$22.00 |
|
|
| |
 |
MSCR-506 |
Small center attachment, 50mm x 6.35mm dia., M6 end
Two shown in assemblies with 2-way t-nuts,
locknuts and thumbscrews. |
14.70 |
|
|
| |
 |
RMF35 |
Ring mounting kit for Faro/Romer portable arms
Includes: 3.5" stainless threaded ring,(4) M5 bolts
and (4) M5 t-nuts |
$155.00 |
|
|
| |
| Clamps / Clamp rods |
Part Number |
Name |
Price |
Qty |
|
 |
CTSC01 |
“Soft-touch” self-wedging tail-spring clamp
Two clamps shown holding egg |
$10.50 |
|
|
| |
 |
CTSC02-S |
Wide tail-spring clamp with "trap slot"
Shown in assembly with 2 rods on cross-slide
The slot prevents the clamp from swiveling |
$20.00 |
|
|
| |
 |
CVTSC56-S |
Vee Clamp with "trap-slot" (width 20mm/.781") |
$21.00 |
|
|
| |
 |
CBC56-S |
Box clamp with ridges and trap slot (20mm/.781")
Shown in assembly with 2 rods on cross-slide
The slot prevents the clamp from swiveling |
$21.00 |
|
|
| |
 |
MCR506T |
Stainless clamp rod, 50mm x 6.35mm dia. with M6 end |
$8.40 |
|
|
| MCR1006T |
Stainless clamp rod, 100mm x 6.35mm dia. with M6 end |
$9.00 |
|
|
| MCR2006T |
Stainless clamp rod, 200mm x 6.35mm dia. with M6 end |
$9.50 |
|
|
| MCR3006T |
Stainless clamp rod, 300mm x 6.35mm dia. with M6 end |
$10.75 |
|
|
| |
 |
CPCAM8 |
Toe-clamp assembly for plate, w/M8 knob-screw |
$20.50 |
|
|
| CPCAM10 |
Toe-clamp assembly for plate, w/M10 knob-screw |
$22.50 |
|
|
| CPCAM12 |
Toe-clamp assembly for plate, w/M12 knob-screw |
$25.00 |
|
|
| Note: |
Clamp screw is stainless w/ phenolic knob, (4) are
recommendedfor plates larger than 450mm x 450mm |
|
| Fasteners |
Part Number |
Name |
Price |
Qty |
|
 |
MCLN619 |
M6 locknut
(for use with clamp rods and rest buttons) |
4.50 |
|
|
| |
 |
MC607 |
M6 set screw with nylon tip |
$1.70 |
|
|
| |
 |
MCTN1 |
T-nuts, 38mm long with (2) M6 threaded holes |
$6.25 |
|
|
| |
 |
MCTS-625 |
Thumbscrew with M6 thread for cross-slides and fastening |
$2.20 |
|
|
| |
| Cases |
Part Number |
Name |
Price |
Qty |
|
 |
CKCC |
Component case with compartments, 465mm x 300 x 75 |
$39.50 |
|
|
