| Locating Components |
Part Number |
Name |
Price |
QTY |
|
 |
CS1-1 |
1” length x 1” dia. standoff |
$14.20 |
|
 |
| CS1.5-1 |
1.5” length x 1” dia. standoff |
$14.45 |
|
|
| CS2-1 |
2” length x 1” dia. standoff |
$14.70 |
|
|
| CS3-1 |
3” length x 1” dia. standoff |
$15.25 |
|
|
| CS4-1 |
4” length x 1” dia. standoff |
$15.75 |
|
|
| CS6-1 |
6” length x 1” dia. standoff |
$16.80 |
|
|
| CS8-1 |
8” length x 1” dia. standoff |
$17.85 |
|
|
| CS1Set |
Complete set (20) |
$297.40 |
|
|
| |
 |
CS75-1 |
1" x .750" dia. standoff |
$10.50 |
|
|
| CS75-1.5 |
1.5" x .750 dia. standoff |
$11.00 |
|
|
| CS75-2 |
2" x .750 dia. standoff |
$11.50 |
|
|
| CS75-3 |
3" x .750 dia. standoff |
$12.00 |
|
|
| CS75-4 |
4" x .750 dia. standoff |
$12.50 |
|
|
| CS75 Set |
Complete set (20) |
$230.00 |
|
|
| |
 |
SPS-25 |
2" x .250 small pin standoff with .150 length pin |
$17.35 |
|
|
| |
 |
CMAG75-5 |
Magnetic attachment for standoffs, .750" dia x .5"
Outer case is nickel plated, top surface is ground.
Post is 1/4-20 stainless |
$13.00 |
|
|
| |
 |
MCMAGP25 |
Magnetic pin standoff assembly
rare earth magnet: .250" thick x .750 dia.
Post is 1/4-20 stainless x 5/16ths dia., w/locknut |
$30.00 |
|
|
| |
 |
CCLL |
Large conical locator, 1” dia.
(1/8" tip x 35° taper), shown on standoff |
$15.45 |
|
|
| |
 |
CCLL75 |
Conical locator, .75" dia. x .75" length |
$14.15 |
|
|
| |
 |
CSWS |
Swivel head assembly
(For horizontal or angular clamping setups) |
$27.30 |
|
|
| |
 |
CCSA12 |
12" cross-slide assembly, engraved, with (2) sliding
clamps, (2) stainless thumbscrews, and (2) lock-nuts
Shown with sliding tool blocks and clamp assemblies |
$73.00 |
|
|
| |
 |
CAR0251 |
Adjustable rest button, stainless, spherical top |
$5.50 |
|
|
| |
 |
CZP-5 |
Adjustable Z locator pin
5/16ths dia. with .3125” spherical tip, ¼-20 x 1” thread - Check Product List |
11.50 |
|
|
| |
CFR516 |
5/16ths stainless flat tip pin, ¼-20 thread - Add |
$12.00 |
|
|
| |
 |
CLR2 |
2" riser, engraved w/ 6 t-slots |
$35.20 |
|
|
| CLR4 |
4" vertical riser,engraved w/ 6 t-slots |
$37.25 |
|
|
| CLR6 |
6" vertical riser,engraved w/ 6 t-slots |
$40.00 |
|
|
| CLR12 |
12" vertical riser,engraved w/ 6 t-slots |
$47.50 |
|
|
| CLR18 |
18" vertical riser,engraved w/ 6 t-slots |
$55.20 |
|
|
| CLR24 |
24" vertical riser,engraved w/ 6 t-slots |
$70.00 |
|
|
| CLR32 |
32" vertical riser,engraved w/ 6 t-slots |
$75.50 |
|
|
| CLR40 |
40" vertical riser,engraved w/ 6 t-slots |
$81.50 |
|
|
| CLR60 |
60" vertical riser,engraved w/ 6 t-slots |
$107.00 |
|
|
| Note: |
Shown with optional full length t-nut strip
risers require 2-way connectors if purchased seperately |
|
| |
 |
CAC-901 |
90 degree angle connector for risers
(2) connectors are recommended for risers up to 150mm
(3) connectors are recommended for all taller risers
When used as a tooling detail, provides threaded holes parallel to t-slot axis. |
$18.35 |
|
|
| |
 |
CTNVB-0 |
Sliding Vee t-nut |
$23.00 |
|
|
| |
 |
STB-1 |
Sliding t-nut tooling block with threaded holes
Provides threaded holes perpendicular to t-slot. |
$22.00 |
|
|
| |
 |
SCR-2025 |
Small center attachment, 2" x .025" dia.
Two shown in assemblies with 2-way t-nuts,
locknuts and thumbscrews. |
14.70 |
|
|
| |
SCR-2025A |
Set of (2) complete center assemblies as shown |
$80.00 |
|
|
| Clamps / Clamp rods |
Part Number |
Name |
Price |
Qty |
|
 |
CTSC01 |
“Soft-touch” self-wedging tail-spring clamp
Two clamps shown holding egg |
$10.50 |
|
|
| |
 |
CTSC02-S |
Wide tail-spring clamp with "trap slot"
Shown in assembly with 2 rods on cross-slide
The slot prevents the clamp from swiveling |
$20.00 |
|
|
| |
 |
CVTSC56-S |
Vee Clamp with "trap-slot" (width 20mm/.781") |
$21.00 |
|
|
| |
 |
CBC56-S |
Box clamp with ridges and trap slot (20mm/.781")
Shown in assembly with 2 rods on cross-slide
The slot prevents the clamp from swiveling |
$21.00 |
|
|
| |
 |
CR2025T |
Stainless clamp rod, 2" x .250 dia. with ¼-20 end |
$8.40 |
|
|
| CR4025T |
Stainless clamp rod, 4” x .250 dia. with ¼-20 end |
$9.00 |
|
|
| CR8025T |
Stainless clamp rod, 8.5” x .250 dia. with ¼-20 end |
$9.50 |
|
|
| CR12025T |
Stainless clamp rod, 12” x .250 dia. with ¼-20 end |
$10.75 |
|
|
| |
 |
CPCAM8 |
Toe-clamp assembly for plate, w/M8 knob-screw |
$20.50 |
|
|
| CPCAM10 |
Toe-clamp assembly for plate, w/M10 knob-screw |
$22.50 |
|
|
| CPCAM12 |
Toe-clamp assembly for plate, w/M12 knob-screw |
$25.00 |
|
|
| Note: |
clamp screw is stainless w/ phenolic knob, (4) are recommendedfor plates larger than 18" x 18" |
|
| Fasteners |
Part Number |
Name |
Price |
Qty |
|
 |
CLN1-75-025 |
Machined locknut 1.0" dia x .75" tall, 1/4-20 thread
For more rigid setup for basing points on clamp rods
Shown with t-nut and clamp rod on plate |
$13.00 |
|
|
| |
 |
CLN025 |
¼-20 stainless knurled locknuts / wear pads
(for use with clamp rods and rest buttons) |
4.50 |
|
|
| |
 |
C3125-5 |
5/16 ” long x ¼-20 set screw SS, with nylon tip |
$1.20 |
|
|
| |
 |
CTN1 |
T-nuts, 1.5” long with (2) ¼-20 threaded holes |
$6.25 |
|
|
| |
 |
CTPS-12 |
12" t-nut position strip for slot, with 1/4-20 tapped
holes - 1" spacing
Shown inserted in t-slot |
$23.00 |
|
|
| |
 |
CTS-050250 |
½” x ¼ -20 stainless thumbscrew with black knurled top - Check |
$1.55 |
|
|
| |
| Cases |
Part Number |
Name |
Price |
Qty |
|
 |
CKCC |
Component case with compartments, 18-1/2” x 12” x 3” |
$39.50 |
|
|
