TP-ES
Entry level system, one piece body construction mounted in a fixed vertical axis. Most economical touch probe. Usable with M2/M3 Styli including extensions to extend deep into features
Principal application | Motorized or Manual CMMs. |
Sense direction | 5-axis: ±X, ±Y, +Z |
Unidirection repeatability maximum (2s µm) (at stylus tip) | 0.50 µm (0.00002 in) |
Pre-travel variation 360° (XY plane) | ±2 µm (0.00008 in) |
Weight *excluding shank and cable | 94 g* (3.3 oz*) |
Stylus range | M3 |
Stylus force range (adjustable) | 0.1 N - 0.5 N |
Stylus force (set by Renishaw) | 0.15 N |
Stylus overtravel (typical) | XY plane: ±19.5° +Z axis: 8.5 mm (0.34 in) @ 0.1 N 5 mm (0.20 in) @ 0.5 N |
Maximum extension on PH10 series | N/A |
Mounting method | Mounting Hole or Ø0.375 |
Suitable interface | PI 4-2 |
Adapter/CMM Compatibility
- Probe Head comes with an adapter/shank for your CMM included with the Probe Head.
- Select the appropriate adapter from the selection tool above.
- MS1 = Brown & Sharpe, Bridgeport, Elm Systems, Fanamation, Giddings & Lewis, I.T.P., Poli, Portage Machine, Tesa, Zett-Mess.
- MS2 = Boice, Carl Zeiss, Federal Products, Helmel, Kemco, Metrologic, MFO, Mora, Numerex, Real Meca, Starrett, Tokyo-Boeki, Tri-Measures, TSK, Wenzel.
- MS3 = LK Tool (meter 4), Ferranti, Taurus, W & A, Eley & Warren
- MS5 = Ferranti
- MS6 = C.E. Johannson (old specification)
- MS7 = Renault (Seiv), Tri Measures
- MS8 = Olivetti
- MS9 = MTI Corporation (UK)
- MS10 = MTI Corporation
- MS11 = Crown Windley
- MS12 = MTI Corporation (new specification)
- MS13 = DEA Corp
- MS14 = CTA, Real Meca
- MS15 = C.E. Johannson (new specification)
- MS17 = Siefelmayer